CrystaLatch™ 1×2 3-Stage PM Optical Switch

Enquire Now

The CL Series 1×2 3-Stage fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all solid sate CL 1×1,1×2 fiber optic switch features low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, and fast response time.
The switch also has build-in circulator and isolator functions. Electronic driver is available for this series of switches.

  • Solid-State high speed
  • Ultra-high reliability
  • Fail-safe latching
  • Low insertion loss
  • Direct low voltage drive
  • Compact
  • Low cost
  • Optical channel blocking
  • Configurable Add/Drop
  • System monitoring
  • Instrumentation
CL 1×1,1×2 3-Stage Switch  Min Typical Max Unit
 Operation Wavelength [1]  1510                      1520 ~ 1570 1550 1620 nm
  1295 1310 1325 nm
 Insertion Loss [2] 0.7 1.1 dB
 Cross Talk [2]    50

 

70 dB
 Polarization Dependent Loss [2] (SM only) 0.1 0.2 dB
 Extinction Ratio [2] (PM only)

only)

   18

 

dB
 Return Loss [2]    50 55 dB
 Polarization Mode Dispersion 0.1 0.2 ps
 Switch Speed (rise, fall) 50 200 ms

 

 Repetition Rate 2K Hz
 Durability    1011 cycle
 Optical Power Handling Standard 300  500 mW
High Power 3 5 W
 Operating Temperature -5 70 oC
 Storage Temperature -40 85 oC
 Fiber Type SMF-28, Panda PM, or equivalent
 Package Dimension          63.5L x 7.8W x 7.8H mm

[1]. Agiltron can achieve same SPEC at L band

[2]. Measured without connectors.

 

P/N: N/A