DC-100 kHz Driver for Dual-Stage/High-Power NanoSpeed™ Switches

Features:
  • High speed
  • High repetition
  • High output voltage
  • Wide input voltage range
  • TTL/CMOS control
  • Push-Pull output design
  • Low power consumption
  • Compact and low cost

Click 'Spec Sheet' for all available configurations/part#
EMAIL ENQUIRY NOW

The NS switch driver provides a convenient way to use the NS series electro-optical switches, which act as a pure capacitive load.   Each driver is tuned to a specific device mounted on the PCB.    To operate, the customer only needs to plug in the accompanying DC power supply and input a control signal through the golden SMA connector.  The switch will be activated as the input voltage exceeds 3V with less than 1µA  draw, compatible with  3.3V CMOS/TTL .   We produce boards to control multiple NS switches with individual SMA connectors.   No computer-based control software is available for such a high-speed operation.

Reviews

There are no reviews yet.

Be the first to review “DC-100 kHz Driver for Dual-Stage/High-Power NanoSpeed™ Switches”

Your email address will not be published.

  Specs Min Typical Max Unit
Rise Time (Tr)[1] 85 100 ns
Fall Time (Tf)[2] 85 100 ns
Repetition Rate DC 100 kHz
Pulse Width 1.0 ms
Control Input (TTL pulse) 0 5 V
Power Consumption 5 W
Power Current 0.08 0.4 A
Power Supply 12 V
Operating Temperature -5 70 ºC
Storage Temperature -40 80 ºC
Electrical Connector SMA
Board Size 3.5(L)x1.25(W) Inch

Note:

[1]: Optic Intensity Change from 10% to 90% intuits;

[2]: Optic Intensity Change from 90% to 10% intuits;

[3]: Switch Speed (Rise): Duration from begin of electronic signal to end of optic intensity change;

[4]: Switch Speed (Fall): Duration from begin of electronic signal to end of optic intensity change.