MEMS 1×2 Non-latching PM Optical Switch
The MEMS Series 1×2 PM Fiberoptic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movement instead of rotation.
This novel design significantly reduces packaging requirement and simplifies driving electronics, offering unprecedented high stability as well as an unmatched low cost.
|MEMS serial 1×2 PM Switch||Min||Typical||Max||Unit|
|Operating Wavelength||850, 980,1060, 1310, 1550||nm|
|Insertion Loss ||0.6||1.0||dB|
|Return Loss ||50||dB|
|Cross Talk ||50||dB|
|Optical Power Handling||300||500||mW|
|Fiber Type||Panda PM Fiber|
.Please contact us for other fiber type.