Fiber Optical Switches

MEMS 1×1, 1×2, 2×2 Non-latching MM Fiber Optic Switch

4

Configuration :
Standard, Quad, Full, Dual, Dual Full
Form Factor
Regular
Fiber Type
Multi Mode
Power Handling
Regular
Wavelength
800 ~ 2000 nm

The etMEMSTM Series Fiber Optical Switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a proprietary thermal activated micro-mirror, moving-in and -out optical paths, uniquely featuring ultra small size, rugged. The MEMS switches can be directly mounted on printed circuit board with configurations of 1×1, Dual 1×1, Quad 1×1, 1×2, Dual 1×2, Full 2×2, and Dual Full 2×2 Single mode and Multimode.

This advanced design offers unprecedented high stability and high reliability as well as low cost advantage.

Download Product Brochure Submit Product Inquiry

♦ High Reliability
♦ Intrinsic tolerance to ESD

♦ Channel Blocking
♦ Configurable Add/Drop
♦ System Monitoring
♦ Instrumentation

 

etMEMSTM Latching with Build-in Driver Switch Min Typical Max Unit
Operating Wavelength  Single mode:     1260~ 1360 and/or 1510~ 1610 nm
 Multimode:         810 ~ 890 and/or 1260/1360
Insertion Loss [1], [2] 0.6 1.0 (1.2)[3] dB
PDL (Single Mode) 0.1 dB
Return Loss [1]  Single mode:     50 dB
 Multimode:       35
Cross Talk [1]  Single mode:     50 dB
 Multimode:        35
Switching Time                                            10 ms
Repeatability ±0.05 dB
Repetition Rate 20 Hz
Durability 109 Cycle
Switching Type Non- Latching
Operating Temperature -5 70 oC
Storage Temperature -40 85 oC
Optical Power Handling 300 500 mW
Package Dimension 13L x 9W x 6H mm
Fiber Type  Single mode:     SMF-28 or equivalent
 Multimode:       MM50/125, MM62.5/125 or equivalent

Notes:

  [1]. Exclude connectors.

  [2]. Multimode IL measure @ Light Source CPR<14 dB.

  [3]. Dual band, and Dual 1×2, Full 2×2, Dual Full 2×2.