Fiber Optical Switches
MEMS 1×1, 1×2, 2×2 Non-latching SM Fiber Optic Switch
The etMEMSTM Series Fiber Optical Switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a proprietary thermal activated micro-mirror, moving-in and -out optical paths, uniquely featuring ultra small size, rugged. The MEMS switches can be directly mounted on printed circuit board with configurations of 1×1, Dual 1×1, Quad 1×1, 1×2, Dual 1×2, Full 2×2, and Dual Full 2×2 Single mode and Multimode.
This advanced design offers unprecedented high stability and high reliability as well as low cost advantage.
♦ High Reliability
♦ Intrinsic tolerance to ESD
♦ Channel Blocking
♦ Configurable Add/Drop
♦ System Monitoring
|etMEMSTM Latching with Build-in Driver Switch||Min||Typical||Max||Unit|
|Operating Wavelength||Single mode: 1260~ 1360 and/or 1510~ 1610||nm|
|Multimode: 810 ~ 890 and/or 1260/1360|
|Insertion Loss , ||0.6||1.0 (1.2)||dB|
|PDL (Single Mode)||0.1||dB|
|Return Loss ||Single mode: 50||dB|
|Cross Talk ||Single mode: 50||dB|
|Switching Type||Non- Latching|
|Optical Power Handling||300||500||mW|
|Package Dimension||13L x 9 W x 6H||mm|
|Fiber Type||Single mode: SMF-28 or equivalent|
|Multimode: MM50/125, MM62.5/125 or equivalent|
. Exclude connectors.
. Multimode IL measure @ Light Source CPR<14 dB.
. Dual band, and Dual 1×2, Full 2×2, Dual Full 2×2.