Fiber Coupled Laser Sources – Multi Mode FP Cavity

Enquire Now

Agiltron offers fiber coupled laser sources covering a wide spectrum from visible to near IR with an output power between a few mW to several ten mW. Each benchtop laser source contains a pigtailed laser diode associated current and a temperature controller in a single unit, featuring high stability over a long period with little drift. They provide the choice of single mode, multimode, and polarization-maintaining outputs.

The front panel displays the output power in mW, and contains an on/off key, and an enable button, and a knob to adjust the laser power. The back panel includes a BNC input that allows the laser diode drive current to be controlled via an external DC or sine wave voltage source and a remote interlock input. All of our fiber-pigtailed lasers utilize an angled fiber ferrule at the internal laser/fiber launch point to minimize reflections back into the laser diode, thereby increasing the stability of the laser diode’s output. Built-in isolator option is available. Agiltron also provides customers design fiber pigtailed laser diode, including VCSEL and TO-CAN laser diode.

$1,180.00$3,380.00

$1,180.00$3,380.00

Clear
  • Compact
  • Low Cost
  • High Reliability
  • High Coupling Efficiency
  • R&D Applications
  • Instrumentations
  • Sensors
Wavelength (nm) Typical Power

(mW)

Spectral Width (nm) Laser Type
Minimum Typical Maximum
395 405 415 50 2 FP
440 455 465 300 3 FP
510 520 530 40 3 FP
630 635 645 80 1 FP
645 650 668 50 1 FP
650 660 670 10 1 FP
805 808 811 20 1 FP
805 808 811 4W 2 FP
960 970 985 1W 3 FP
974 975 980 10W 4 FP
1300 1320 1340 4W 10 FP
1450 1470 1590 3W 10 FP
1530 1550 1570 3W 10 FP
P/N: N/A