NanoSpeed™ 1×2 PM High Speed Optical Switch

Enquire Now

The NanoSpeedTM Series 1×2 solid-state fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output optical fiber. This is achieved using patent non-mechanical configurations with solid-state all-crystal designs, which eliminates the need for mechanical movement and organic materials. The NS fiber optic switch is designed to meet the most demanding switching requirements of ultra-high reliability, fast response time, and continuous switching operation. This series of switches are bidirectional intrinsically.

Agiltron’s PCB driver listed in the web is recommended to operate this device, featuring high efficiency and low cost with 12V DC power and TTL control signal.

  • Solid-State
  • High speed
  • Ultra-high reliability
  • Low insertion loss
  • Compact

 

  • Optical protection
  • Configurable operation
  • Instrumentation
NanoSpeed Series 1×2 Switch MinTypicalMaxUnit
Central wavelength [1]7801650nm
Insertion

Loss [2]

1260~1650nm0.61.0dB
960~1100nm0.81.3
780~960nm (Normal

power switch only)

1.01.5
Cross Talk202535dB
PDL (SMF Switch only)0.150.3dB
PMD (SMF Switch only)0.10.3ps
ER (PMF Switch only)1825dB
IL Temperature Dependency0.250.5dB
Return Loss455060dB
Response Time (Rise, Fall) 30300ns
Fiber TypeSMF-28, Panda PM, or equivalent
Repeat Rate5kHz driverDC5kHz
100kHz driverDC100
500kHz driverDC500
Optic power

Handling [3]

Normal power switches300mW
High power switches5W
Operating Temperature-570oC
Storage Temperature-4085oC

[1] Operation bandwidth is +/- 25nm approximately at 1550nm.

[2] Measured without connectors. For other wavelength, please contact us.

[3] Defined at 1310nm/1550nm. For the shorter wavelength, the handling power may be reduced, please contact us for more information.

 

 

P/N: N/A