♦ Ultra High speed
♦ Ultra-high reliability
♦ Low insertion loss
NanoSpeed™ High Power 1×2 Broadband PM High Speed Optical Switch
The NanoSpeedTM Series 1×2 solid-state fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output optical fiber. This is achieved using patent non-mechanical configurations with solid-state all-crystal designs, which eliminates the need for mechanical movement and organic materials. The broadband series of NS fiber optic switch is designed to meet the most operation requirements of wave length band in addition of ultra-high reliability, fast response time, and continuous switching operation. This series of switches are bidirectional intrinsically.
Agiltron’s PCB driver listed in the web is recommended to operate this device, featuring high efficiency and low cost with 12V DC power and TTL control signal.
♦ Optical blocking
♦ Configurable operation
|NS Broadband Series 1×2 Switch||Min||Typical||Max||Unit|
power switch only)
|PDL (SMF Switch only)||0.15||0.3||dB|
|PMD (SMF Switch only)||5||6||ps|
|ER (PMF Switch only)||18||25||dB|
|IL Temperature Dependency||0.25||0.5||dB|
|Response Time (Rise, Fall)||30||300||ns|
|Fiber Type||SMF-28, Panda PM, or equivalent|
|Repeat Rate||5kHz driver||DC||5||kHz|
|Normal power switches||300||mW|
|High power switches||5||W|
 Measured without connectors.
 Defined at 1310nm/1550nm. For the shorter wavelength, the handling power may be reduced, please contact us for more information.