- High speed
- Ultra-high reliability
- Low insertion loss
NanoSpeed™ Single-Stage High Speed Variable Optical Attenuator/Modulator
The NS Series Variable Fiber Optical Attenuator (VOA) provides electrical control of optical power. This is achieved using a patent pending non-mechanical configuration and activated via a voltage electrical control signal. The solid-state optical crystal design eliminates mechanical movement and organic materials. The NS Series Variable Optical Attenuators are designed to meet the most demanding operation requirements of ultra-high reliability and fast response time with minimal mechanical footprint. Agiltron also offers customized electronic designs to meet special control requirements and applications. The switch is bidirectional.
The NS Series VOA is available in either normally-transparent or normally-opaque configurations.
Agiltron’s PCB driver listed in the web is recommended to operate this device, featuring high efficiency and low cost with 12VDC power and 0-5V control input.
- Optical blocking
- Configurable operation
|NanoSpeed Series VOA||Min||Typical||Max||Unit|
|Central wavelength ||780||1650||nm|
(Normal power VOA only)
|PDL (SMF VOA only)||0.1||0.3||dB|
|PMD (SMF VOA only)||0.1||0.3||ps|
|ER (PMF VOA only)||18||25||dB|
|Response Time (Rise, Fall)||30||300||ns|
|Fiber Type||SMF-28, Panda PM, or equivalent|
|Repeat Rate||5kHz driver||DC||5||kHz|
|Modulation rate ||0.1||5||MHz|
|Normal power VOA||300||mW|
|High power VOA||5||W|
 Operation bandwidth is +/- 25nm approximately at 1550nm.
 Measured without connectors. For other wavelength, please contact us.
 Special circuit for narrow frequency range, maximum modulation depth is 5~10%.
 Defined at 1310nm/1550nm. For the shorter wavelength, the handling power may be reduced, please contact us for more information.