NanoSpeed™ 1×2 Broadband High Speed Optical Switch

Enquire Now

The NanoSpeedTM Series 1×2 solid-state fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output optical fiber. This is achieved using patent non-mechanical configurations with solid-state all-crystal designs, which eliminates the need for mechanical movement and organic materials. The broadband series of NS fiber optic switch is designed to meet the most operation requirements of wave length band in addition of ultra-high reliability, fast response time, and continuous switching operation. This series of switches are bidirectional intrinsically.

Agiltron’s PCB driver listed in the web is recommended to operate this device, featuring high efficiency and low cost with 12V DC power and TTL control signal.

♦ Solid-State
♦ Ultra High speed
♦ Ultra-high reliability
♦ Low insertion loss
♦ Compact

♦ Optical blocking
♦ Configurable operation
♦ Instrumentation

NS Broadband Series 1×2 Switch Min Typical Max Unit

Loss [1]

 1260~1650nm 0.6 1.0 dB
960~1100nm 0.8 1.3
760~960nm (Normal

power switch only)

1.0 1.5
Cross Talk 20 25 35 dB
PDL (SMF Switch only) 0.15 0.3 dB
PMD (SMF Switch only) 5 6 ps
ER (PMF Switch only)       18  25 dB
IL Temperature Dependency 0.25 0.5 dB
Return Loss 45 50 60 dB
Response Time (Rise, Fall)  30 300 ns
Fiber Type SMF-28, Panda PM, or equivalent
Repeat Rate 5kHz driver DC 5 kHz
100kHz driver DC 100
500kHz driver DC 500
Optic Power

Handling [2]

Normal power switches 300 mW
High power switches 5 W
Operating Temperature -5 70 oC
Storage Temperature -40 85 oC

[1] Measured without connectors.

[2] Defined at 1310nm/1550nm. For the shorter wavelength, the handling power may be reduced, please contact us for more information.



P/N: N/A