- Solid-State High Speed
- Ultra-High Reliability
- Low Insertion Loss
NanoSpeed™ High Speed Variable Optical Splitter
The NanoSpeed™ 1×2 Solid-State Variable Fiber Optic Splitter splits an incoming optical signal among two output optical fibers with an electrically variable power ratio. This is achieved using a patent pending non-mechanical configuration. When the electrical control signal is removed, the splitter latches to a pre-determined ratio with a standard version of 100:0. The device is bidirectional, transmitting light in both direction simultaneously. The all-solid-state crystal design eliminates the need for mechanical movement and organic materials. The NS Fiber Optic Splitter is designed to meet the most demanding switching requirements of ultra-high reliability, fast response time, and continuous operation.
- Optical Channel Blocking
- System Monitoring
|NS 1×2 Splitter||Min||Typical||Max||Unit|
|Cross Talk at 100% splitter||20||25||35||dB|
|Response Time (Rise, Fall)||30||300||Ns|
|Repetition Rate ||DC||5||kHz|
|Polarization Dependent Loss||0.1||0.35||dB|
|IL Temperature Dependency||0.25||0.5||dB|
|Polarization Mode Dispersion||0.1||0.2||Ps|
|Optical Power Handling ||300||mW|
 Excluding connectors.
 Standard driver. High repetition rate (up to 100 KHz) is available with special circuit, please call us.
 Defined at 1310/1550nm. For the shorter wavelength, the handling power may be reduced.