CrystaLatch™ 2×2 Dual-Stage PM High Power Optical Switch

Enquire Now

The CL Series 2×2 Solid State Fiber Optical Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-movement configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all solid sate fiberoptic switches feature low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, as well as fast response time.

The switch also has build-in Circulator and isolator functions. Electronic driver is available for this series of switches.

 CL Dual Stage 2×2 Series Switch MinTypicalMaxUnit
 Operation Wavelength [1]152015501580nm
 Insertion Loss [2]  0.71.2dB
 Cross TalkBidirectional Series Switch35        50dB
Unidirectional Series Switch37        50dB
 PDL (SM Series Switch only)   0.10.2dB
 Extinction Ratio (PM Series Switch only)18  25dB
 Return Loss50   55dB
 Polarization Mode Dispersion 0.10.2           ps
 Switch Speed (rise, fall)5    50200ms
 Repetition Rate    2KHz
 Durability  1011cycle
 Operating Temperature-570oC
 Storage Temperature-4085oC
 Optical Power        .  HandlingStandard   300500mW
High power series 35W
 Switch type          Solid-State Latching
 Fiber Type     SMF-28,  Panda PM, or equivalent
 Package Dimension            68.6L x 11.0W x8.4Hmm


[1]. Agiltron can achieve same SPEC at L band.

[2]. Measured without connectors.




P/N: N/A