MEMS 1×2, 2×2 Reflective Fiber Optical Switch

3V and 5V Driving Voltage Optional

The MEMS 1×2 Mini Fiberoptic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a proprietary MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermally-activated micro-mirror, moving-in and -out of optical paths instead of rotating. This novel design significantly simplify the control electronics, offering unprecedented high stability, ultra compact dimension and an unmatched low cost .

MEMS 1×2, 2×2 Reflective Fiber Optical Switch

The MEMS 1x2 Mini Fiberoptic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a proprietary MEMS configuration and activated via an electrical control signal. It uniquely features rugged thermally-activated micro-mirror, moving-in and -out of optical paths instead of rotating. This novel design significantly simplify the control electronics, offering unprecedented high stability, ultra compact dimension and an unmatched low cost .
 MEMS Mini 1×2 Switch      Min Typical Max Unit
Operation Wavelength Single Band  1260~1360 or 1510~1610 nm
Dual Band     1260~1360 and 1510~1610
Broad Band  1260~1620
Insertion Loss [1] 0.6 1.0 dB
Wavelength Dependent Loss 0.2     0.3 [2] dB
Polarization Dependent Loss         0.1 dB
Return Loss [1] 50 dB
Cross Talk [1] 50 dB
Switching Time 10 ms
Repeatability                                                  ±0.05 dB
Repetition Rate                                                    20        Hz
Durability          109 Cycle
Switching Type Non-Latching
Operating Temperature -5 70 oC
Storage Temperature -40 85 oC
Optical Power Handling 300 500 mW
Fiber Type                           SMF-28 [3]

[1]. Excluding connectors.

[2]. DW: Dual band and Broad band.

[3]. Please contact us for other SM fiber version