MEMS 1×4 Non-latching MM Optical Switch

The etMEMSTM Series 1×3,1×4 MM Fiberoptic switch connects optical channels by redirecting incoming optical signals into selected output fibers. This is achieved using a patent pending etMEMSTM configuration and activated via an electrical control signal. It uniquely features rugged thermal activated micro-mirror movement instead of rotation.

This novel design significantly reduces packaging requirement and simplifies driving electronics, offering unprecedented high stability as well as an unmatched low cost.

♦ High Reliability
♦ Intrinsic tolerance to ESD

♦ Channel Routing
♦ Configurable Add/Drop
♦ System Monitoring
♦ Instrumentation

etMEMSTM 1x4 Switch Min Typical Max Unit
Operating Wavelength  Single Band:      850, 1310 or 1550 nm
Dual Band:          850 and 1310
Insertion Loss [1]  0.6 1.2[2] dB
Wavelength Dependent Loss 0.2 0.3[2] dB
Return Loss [1] 35 dB
Cross Talk [1] 35 dB
Repeatability ±0.05 dB
Switching Time 10 ms
Repetition Rate 20 Hz
Durability 109 Cycle
Switching Type Non-latching
Operating Temperature -5 70 oC
Storage Temperature -40 85 oC
Optical Power Handling 300 500 mW
Fiber Type MM 50/125, MM 62.5/125[3]

Notes:

  [1]. Exclude connectors.

  [2]. Dual band.

  [3]. Please contact us for other MM fiber type.