Dual-Stage High Power 1×1 Fiber Optical Switch: 10W, 100ns, 35dB On/Off

Features:
  • 100ns Rise/Fall
  • 500kHz
  • 850nm to 1620nm
  • 0 to 70 °C
  • Bidirectional
  • Solid-State
  • High on-off ratio
  • High speed
  • Ultra-high reliability
  • Low insertion loss
  • Compact

Email Inquiry
Fast Quote-Select Part #
Special Order

SKU: NSSW, NHSW

The NS Series dual-stage 1×1 solid-state fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output optical fiber. This is achieved using patent-pending non-mechanical configurations with solid-state all-crystal designs, eliminating the need for mechanical movement and organic materials. The dual-stage series of NS fiber-optic switches is designed to meet the demand of high cross-talk in addition to ultra-high reliability, fast response time, and continuous switching operation. The switch is intrinsically bidirectional and selectable for polarization-independent or polarization-maintaining by the fiber type.
Agiltron’s PCB driver listed on the web is recommended to operate this device, featuring high efficiency and low cost with 12V DC power and TTL control signal.
The rise/fall time is intrinsically related to the crystal properties, and the repetition rate is associated with the driver. There are poor frequency response sections due to the device resonances. The NS devices are shipped mounted on a tuned driver.
The NS series switches respond to a control signal with any arbitrary timing with frequency from DC up to MHz. The switch is usually mounted on a tuned driver before shipping. The electrical power consumption is related to the repetition rate at which the switch is operated.
The dual-stage configuration increases the extinction ratio or cross-talk value.

Reviews

There are no reviews yet.

Be the first to review “Dual-Stage High Power 1×1 Fiber Optical Switch: 10W, 100ns, 35dB On/Off”

Your email address will not be published. Required fields are marked *