CrystaLatch™ 1×4 High Power Optical Switch

Enquire Now

The CL Series 1×4 Series fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The CL 1×4 series fiber optic switch feature low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, and fast response time.

The switch also has build-in circulator and isolator functions. Electronic driver is available for this series of switches.

  • High Speed
  • Non-Mechanical
  • High Reliability
  • Fail-Safe Latching
  • Low Insertion Loss
  • Rugged
  • Compact
  • Cost Effective
  • Direct Low Voltage Drive
  • Optical Signal Routing
  • Network Protection
  • Burst Switching
  • Configurable Add/Drop
  • Signal Monitoring
  • Instrumentation
CL 1x4 Series Switch Min Typical Max Unit
Operation Wavelength [1] 1520 1550 1580 nm
1295 1310 1325 nm
Insertion Loss [2] 1.2 1.7 dB
Cross Talk [2] Bidirectional Series 35 50 dB
Unidirectional Series 40 50 dB
Return Loss [2] 50 55 dB
PDL (SM Series Switch only) 0.15 0.25 dB
Extinction Ratio (PM Series Switch only)       18  25 dB
Polarization Mode Dispersion 0.2 ps
Switch Speed (Rise, Fall) 50 200 µs
Repetition Rate 2K Hz
Durability   1011 cycle
Optic Power Handling Standard         300  500 mW
High Power Series 3 5 W
Switch type           Solid-State Latching
Operating Temperature        -5                                70       oC
Storage Temperature       -40                               85       oC
Fiber Type SMF-28, Panda PM, or equivalent
Package Dimension         53.5L x 38.3W x 8.5H               mm

 

[1]. Agiltron can achieve same SPEC at L band

[2]. Measured without connectors.

 

P/N: N/A