♦ High Speed
♦ Low Insertion Loss
♦ High Extinction Ratio
♦ High Isolation
♦ Fail-Safe Latching
♦ Compact & Rugged
♦ Direct Low Voltage Drive
CrystaLatch™ 1×1, 1×2 PM Optical Switch
The CL Series 1×1, 1×2 PM fiber optical switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-mechanical configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all solid sate CL 1×2 fiberoptic PM switch features low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability and repeatability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, and fast response time. The switch also has build-in Circulator and isolator functions. Electronic driver is available for this series of switches.
♦ High Speed
♦ Optical Signal Routing
♦ Network Protection/Restoration
♦ Burst Switching
♦ Configurable Add/Drop
♦ Signal Monitoring
|CL 1×2 PM Series Switch 1||Min||Typical||Max||Unit|
|Insertion Loss 2||0.6||1.0||dB|
|Switch Speed (rise, fall)||5||50||200||µs|
|Return Loss 2||50||dB|
|Operating Temperature 4||0||70||oC|
|Optical Power Handling 3||300 500||mW|
|Fiber Type||PM 250, or equivalent|
|Package Dimension||58.2L x 8.4W x 8.4H||mm|
- Agiltron can achieve same SPEC at L band.
- Measured without connectors.
- Continuous operation, for pulse operation call.
- -40 oC version is also available.