♦ High Speed
♦ Low Insertion Loss
♦ High Reliability
♦ Fail-Safe Latching
♦ Direct Low Voltage Drive
♦ Low Cost
CrystaLatch™ 2×2 Dual Stage Optical Switch
The CL Series 2×2 Solid State Fiber Optical Switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved using patented non-movement configurations and activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The all solid sate fiberoptic switches feature low insertion loss, high extinction ratio, high channel isolation, and extremely high reliability. It is designed to meet the most demanding switching requirements of continuous operation without failure, longevity, operation under shock/vibration environment and large temperature variations, as well as fast response time.
The switch also has build-in Circulator and isolator functions. Electronic driver is available for this series of switches.
♦ High Speed
♦ Optical channel blocking
♦ Configurable Add/Drop
♦ System monitoring
|CL Dual Stage 2×2 Series Switch||Min||Typical||Max||Unit|
|Operation Wavelength ||1520||1550||1580||nm|
|Insertion Loss ||0.7||1.2||dB|
|Cross Talk||Bidirectional Series Switch||35||50||dB|
|Unidirectional Series Switch||37||50||dB|
|PDL (SM Series Switch only)||0.1||0.2||dB|
|Extinction Ratio (PM Series Switch only)||18||25||dB|
|Polarization Mode Dispersion||0.1||0.2||ps|
|Switch Speed (rise, fall)||5||50||200||ms|
|Optical Power . Handling||Standard||300||500||mW|
|High power series||3||5||W|
|Switch type||Solid-State Latching|
|Fiber Type||SMF-28, Panda PM, or equivalent|
|Package Dimension||68.6L x 11.0W x8.4H||mm|
. Agiltron can achieve same SPEC at L band.
. Measured without connectors.