The HPFC Series fiber optic coupler is fully tested and burn-in at the specified high power for quality control. 2×2 can be used as 1×2 in which the reflected optical power is safely guided out through the extra fiber. An angle termination is required to avoid back reflection. The coupler is based on Photonwares’s fused biconical taper technology and compact packaging structure. It features good uniformity, low excess loss and very low polarization sensitivity. The device is ideal for splitting or combining light with exceptional performance over a wide wavelength range.
High Power 2x2 Single Mode Fiber Optic Coupler/Splitter
(10W, 20W)
HPFC Series | Premium P | Grade A | Unit | |
Splitting Ratio | 0.5/99.5 to 50/50 | |||
Bandwidth | 1060 ± 40 and 1550 ± 40 | nm | ||
Excess Loss | 0.07 | 0.1 | dB | |
Insertion Loss | 50/50 | 3.4/3.4 | 3.6/3.6 | dB |
40/60 | 4.4/2.5 | 4.8/2.8 | dB | |
30/70 | 5.6/1.8 | 6.1/2.0 | dB | |
20/80 | 7.5/1.2 | 8.0/1.3 | dB | |
10/90 | 10.8/0.6 | 12.0/0.8 | dB | |
5/95 | 14.6/0.4 | 18.4/0.5 | dB | |
4/96 | 16.0/0.3 | 19.0/0.4 | dB | |
3/97 | 17.5/0.3 | 19.5/0.4 | dB | |
2/98 | 19.0/0.2 | 20.0/0.3 | dB | |
1/99 | 21.5/0.2 | 22.0/0.3 | dB | |
0.5/99.5 | 23.0/0.2 | 24.0/0.3 | dB | |
Polarization Dependent Loss | 0.1 | 0.15 | dB | |
Uniformity | 0.6 | 1.0 | dB | |
Optical Power Handling | 10, 20 | W | ||
Operating Temperature | -40~85 | oC | ||
Storage Temperature | -50~85 | oC | ||
Package Dimension * | Bare fiber: (ø)3x(L)54 | mm | ||
900um loose tube: (ø)3x(L)70 | ||||
900um loose tube: 90 (L) x16x9 |
Reviews
There are no reviews yet.