- Unmatched Low Cost
- Low Optical Distortions
- High Isolation
- High Reliability
- Epoxy-Free Optical Path
The LB 1×4 Series fiber optic switch connects optical channels by redirecting an incoming optical signal into a selected output fiber. This is achieved by using a patent pending opto-mechanical configuration activated via an electrical control signal. Latching operation preserves the selected optical path after the drive signal has been removed. The switch has integrated electrical position sensors, and the new material based advanced design significantly reduces moving part position sensitivity, offering unprecedented high stability as well as an unmatched low cost. Electronic driver is available for this series of switches.
|LB 1×4 PM Series Switch||Min||Typical||Max||Unit|
|Operation Wavelength||850, 980, 1060, 1310, 1550||nm|
|Insertion Loss ||0.7||1.1||dB|
|Extinction Ratio  (PM)||18||dB|
|Polarization Dependent Loss (SM, PM)||0.1||dB|
|Return Loss ||SM, PM||50||dB|
|Cross Talk ||SM, PM||50||dB|
|Operating Current ||Latching||26||mA|
|Voltage Pulse Width (Latching)||20||ms|
|Switching Type||Latching / Non-Latching|
|Optical Power Handling||Standard||300 500||mW|
|High Power||3 5||W|
|Fiber Type||SM, MM||SMF-28, MM50/125, MM 62.5/125,|
|PM||Panda 400, Panda 250|
|Package Dimension||54L x 31W x 12H||mm|
. Exclude connectors.
. Tested at 5VDC for each coil actuation.
. Measure at Light Source CPR<14 dB.