NanoSpeed™ Switch 1MHz Driver

Enquire Now

(Only for Nano-Speed Premium type of switches)

The NS high repetition switch driver provides driving signals for the NS series solid state switches. The push-pull output design ensures fast switching time for both rising and falling edges, and it is especially suitable for driving capacitive switch loads.
The standard driver controls one individual switch. Drivers that control multiple switches also are available, please call Sales at (781) 935-1200.

(Only for Nano-Speed Premium type of switches)

♦ High speed
♦ High output voltage
♦ Wide input voltage range
♦ TTL/CMOS control
♦ Push-Pull output design
♦ Low power consumption
♦ Compact and low cost

♦ Optical Switch
♦ EO device driver

*Parameters*	Min	Typical	Max	Unit
Rise Time(Tr)^[1]		85	100	ns
Fall Time(Tf)^[2]		85	100	ns
Switch Rise Speed(Sr)^[3]		315	350	ns
Switch Fall Speed(Sf)^[4]		315	350	ns
Repetition Rate			1.0	MHz
Pulse Width	0.45			us
Control Input			5	V
Power Consumption			12	W
Power Current	0.08		1.0	A
Power Supply		12		V
Operating Temperature	-5		70	°C
Storage Temperature	-40		85	°C
Electrical Connector	SMA
Package Dimension	3.5 L x 2.5 W x 1.5 H			inch

Notes:

    [1] Optic Intensity Change from 10% to 90% intuits
    [2] Optic Intensity Change from 90% to 10% intuits
    [3] Switch Speed (Rise): Duration from begin of electronic signal to end of optic intensity change
    [4] Switch Speed (Fall): Duration from begin of electronic signal to end of optic intensity change

P/N: 0-22